20/24 Inch AW Electric Bicycle Front Wheel Conversion Kit - 36V 750W E-Bike Motor Kit with Thumb Throttle - Perfect for DIY E-Bike Upgrades, Commuting & Eco-Friendly Transportation

Due to the expense of this I am very hesitant to review until I have been able to use it for a while. But for those wanting to convert to an ebike I wanted to share what I have learned.. Installation is as stated in the seller's description. Just install a tube and tire to the wheel, bolt it up to the forks, place the controller and run the wires. The pros are; the connections are easy and pretty impossible to not wire correctly, the supplied bag is ample for the controller and most batteries. The motor performs at or above expectations on level, sustained riding, the throttle is responsive. The cons are; the wires could be longer, there is no way to not use the cut-off brake switches without cutting the wires, and the motor is slow to start off and will not start on a slight incline. I wanted the cut-off switch on one set of brakes but not both but also wanted the brake levers to match. The only way was to cut the wire from the one not wanted. This is my first ebike and had no experience with sizes/wattage. I was not interested in high speed and after much reading chose the 750 watt. In hindsight I would have gone 1,000 watts. This one takes a few seconds to get up to speed, slows significantly on hills and strains to take off on even a slight incline. But, it does seem to be of acceptable quality and appears a reasonable value compare to competition.